Ignite Creation Date:
2025-12-24 @ 2:16 PM
Ignite Modification Date:
2026-01-22 @ 5:00 AM
Study NCT ID:
NCT03636295
Status:
RECRUITING
Last Update Posted:
2025-09-29
First Post:
2018-07-25
Is Gene Therapy:
True
Has Adverse Events:
False
Brief Title:
Low INR to Minimize Bleeding With Mechanical Valves Trial
Sponsor:
Population Health Research Institute
Organization:
Study Overview
Official Title:
Low INR to Minimize Bleeding With Mechanical Valves Trial
Status:
RECRUITING
Status Verified Date:
2025-09
Last Known Status:
None
Delayed Posting:
No
If Stopped, Why?:
Not Stopped
Has Expanded Access:
False
If Expanded Access, NCT#:
N/A
Has Expanded Access, NCT# Status:
N/A
Acronym:
LIMIT
Brief Summary:
This study evaluates the use of a lower INR target (1.5 to 2.5) in patients with a mechanical bileaflet heart valve in the aortic position. This study will inform physicians about whether a lower INR target will decrease the risk of bleeding or increase the risk of blood clot formation and stroke. These results have the potential to reduce the burden of bleeding in patients with a mechanical heart valve who require lifelong warfarin (Coumadin) treatment.
Detailed Description:
Warfarin (Coumadin) is a blood thinner used to prevent blood clot formation in patients with mechanical heart valves. Blood clots can block blood flow to the brain, heart, or other parts of the body. Mechanical heart valves increases the risk of clot so patients with a mechanical heart valve must take warfarin to reduce their risk of stroke and other blood clot-related problems.
The degree to which warfarin 'works' varies from person to person, and so dosage is determined by measuring each person's response to the drug as an 'international normalized ratio' or INR. A patient with an INR over 1.0 has blood that takes longer to clot than average, and increasing INR values represent increasing time required for blood to clot. While an INR over 1.0 decreases clotting risk, it also increases bleeding risk. It is important to carefully balance these risks.
Specific INR targets have been recommended for patients with a mechanical heart valve, but these recommendations differ between scientific groups and are based on low quality evidence. Recent studies suggest that a lower INR target range than is currently recommended can be used safely. A laboratory study showed that warfarin effectively prevents blood clot formation on mechanical heart valves as long as the INR is 1.5 or above. Two moderately-sized clinical studies showed that an INR target range of 1.5-2.5 resulted in less bleeding than the usual higher target range without increasing blood clot formation or stroke in patients with a newer valve model. Whether we could use a lower INR target range for patients with a mechanical aortic valve remains controversial.
This study evaluates the use of a lower INR target (1.5 to 2.5) in patients with a mechanical bileaflet heart valve in the aortic position. This study will inform physicians about whether a lower INR target will decrease the risk of bleeding or increase the risk of blood clot formation and stroke. These results have the potential to reduce the burden of bleeding in patients with a mechanical heart valve who require lifelong warfarin (Coumadin) treatment.
The degree to which warfarin 'works' varies from person to person, and so dosage is determined by measuring each person's response to the drug as an 'international normalized ratio' or INR. A patient with an INR over 1.0 has blood that takes longer to clot than average, and increasing INR values represent increasing time required for blood to clot. While an INR over 1.0 decreases clotting risk, it also increases bleeding risk. It is important to carefully balance these risks.
Specific INR targets have been recommended for patients with a mechanical heart valve, but these recommendations differ between scientific groups and are based on low quality evidence. Recent studies suggest that a lower INR target range than is currently recommended can be used safely. A laboratory study showed that warfarin effectively prevents blood clot formation on mechanical heart valves as long as the INR is 1.5 or above. Two moderately-sized clinical studies showed that an INR target range of 1.5-2.5 resulted in less bleeding than the usual higher target range without increasing blood clot formation or stroke in patients with a newer valve model. Whether we could use a lower INR target range for patients with a mechanical aortic valve remains controversial.
This study evaluates the use of a lower INR target (1.5 to 2.5) in patients with a mechanical bileaflet heart valve in the aortic position. This study will inform physicians about whether a lower INR target will decrease the risk of bleeding or increase the risk of blood clot formation and stroke. These results have the potential to reduce the burden of bleeding in patients with a mechanical heart valve who require lifelong warfarin (Coumadin) treatment.
Study Oversight
Has Oversight DMC:
True
Is a FDA Regulated Drug?:
False
Is a FDA Regulated Device?:
False
Is an Unapproved Device?:
None
Is a PPSD?:
None
Is a US Export?:
True
Is an FDA AA801 Violation?: