Ignite Creation Date:
2025-12-18 @ 9:19 AM
Ignite Modification Date:
2025-12-23 @ 10:02 PM
Study NCT ID:
NCT05978440
Status:
None
Last Update Posted:
2023-08-07 00:00:00
First Post:
2023-07-30 00:00:00
Is Possible Gene Therapy:
False
Has Adverse Events:
False
Brief Title:
This Trial Will Evaluate the Clinical Performance of Onlay Restorations Fabricated Using Rubber Dam Scanning Techniques.
Sponsor:
None
Organization:
Study Overview
Official Title:
Clinical and Laboratory Evaluation of Cad-cam Restorations Fabricated From Digital Impression Under Rubber Dam Isolation (Randomized Clinical Trial & In-vitro Study)
Status:
None
Status Verified Date:
2023-07
Last Known Status:
NOT_YET_RECRUITING
Delayed Posting:
No
If Stopped, Why?:
Not Stopped
Has Expanded Access:
False
If Expanded Access, NCT#:
N/A
Has Expanded Access, NCT# Status:
N/A
Acronym:
None
Brief Summary:
A total of 54 molars will be prepared for CAD-CAM onlay restorations. The preparations will be divided into three groups according to the technique of scanning. Group I: 18 preparations will be scanned without rubber dam using standard technique, group II: 18 preparations will be scanned under rubber dam isolation using cut technique, and group III: 18 preparations will be scanned under rubber dam isolation using lock technique. Final restorations will be milled, checked and cemented, then will be evaluated using the modified FDI criteria at baseline, three months, six months, and one year.
Thirty resin dies will be 3D printed after scanning of a first molar tooth prepared for onlay. The dies will be scanned after they fit in a typodont and grouped with the same technique (n=10 per group). The digital scans will be superimposed using a 3D best-fit alignment method and 3D deviation will be calculated for each group itself and to the other groups. The marginal fit of the restorations produced will be checked using two methods: Triple scan and measuring the cement thickness after cementation and sectioning of the samples.
All data will be collected, and statistically analyzed using suitable tests.
Thirty resin dies will be 3D printed after scanning of a first molar tooth prepared for onlay. The dies will be scanned after they fit in a typodont and grouped with the same technique (n=10 per group). The digital scans will be superimposed using a 3D best-fit alignment method and 3D deviation will be calculated for each group itself and to the other groups. The marginal fit of the restorations produced will be checked using two methods: Triple scan and measuring the cement thickness after cementation and sectioning of the samples.
All data will be collected, and statistically analyzed using suitable tests.
Detailed Description:
None
Study Oversight
Has Oversight DMC:
None
Is a FDA Regulated Drug?:
None
Is a FDA Regulated Device?:
None
Is an Unapproved Device?:
None
Is a PPSD?:
None
Is a US Export?:
None
Is an FDA AA801 Violation?: